Fan Settings
Setting up an efficient fan setup required fan settings that were also efficient. This took many revisons before I found the perfect configuration but atlas I’ve got it perfect. This is…
Knock Detection Tuning
For the past month I have been tuning the ignition table for my turbo Mx6. Particullary the locations under boost. This was important to do correctly to avoid engine damage. I…
MS3Pro Evo+ Settings
In this post I am sharing my settings on my MS3Pro Evo+. These are common settings and settings that I discovered on my own that I could not find else where,…
Sequential Ignition Setup
After the Cam Sensor Retrofit I decided that I would gather the parts necessary to Run this engine full sequential. Some of the benefits that interested me in a Sequential ignition…
1995+ Cam Sensor Retrofit
I have been planning on upgrading my standalone setup to sequential injection, to this the engine will need a cam sensor installed.ย ย There is various ways to do this, the cleanest…
Air Conditioning
When I started building this car for boost in 2006 I decided it would be much easier to do without A/C. I removed every AC component in the engine bay and…
MS3Pro Evo+ Wiring
When it came to installing the MS3Pro Evo+ I debated for a considerable amount of time how I would approach it. I figured I had 2 options: 1. Splice into the…
Ms3Pro Evo+
My Plan for 2025 is to upgrade from the MSPNP2 to the MS3Pro Evo+. The MSPNP2 has been perfect for my mx6 since I bought it in 2011. I contemplated for…
End of content
End of content