KLG4 Throttle Body TPS
To use the KLG4 manifold you will need a KLG4 Throttlebody (or aftermarket that requires modifications) The G4 manifold uses a different style TPS that has only 3 wires and connects…
KLG4 Manifold Finishing
I had some plans for this manifold that changed last minute, for the better. I originally imagined this manifold painted in a wrinkle black color. But after doing a mockup photoshop…
KLG4 vs KLDE Intake Manifold
These are comparison pictures of the KLDE and KLG4 Intake manifold along with rough measurements. Below is a comparison of the inlet of the manifolds, as you can see the KLDE…
KLG4 Intake Manifold
I bought this intake manifold used off Ebay. The KLG4 is known to be a better intake manifold than the KLDE intake manifold and comparable to the KLZE Intake manifold
I did a lot of searching prior to buying this intake manifold particularly to see if a KLDE throttle body would fit on it. I have 2 KLDE throttle body’s already, why not make use of one and save my self some money.
Simplified Distributor Diagnosis 1993-1994 V6
This is a simplified guide to diagnosis common problems with the 1993-1994 Distributor. This guide was made easy so that anyone can try with a basic electrical test light. Incandescent or…
93-94 to 95+ Distributor Conversion
This is a wiring reference guide to use a 1993-1994 Distributor on your 1995-1997 KL V6 Engine. WHY? There is no benefit to using an earlier version of the distributer. This…
1993-1995 OBD1 Port Reference – Mx6,626,Probe
Radiator Fan Activation Use a Paper Clip or 18ga Wire to to Jumper TFA to GND in the diagnostic Box. This will activate the Radiator Fan manually. Fuel Pump Activation…
1993-1997 Torque Specifications
1993-1997 2nd Gen Mx6, 626 & Ford ProbeSEAT BELTSAll seat belt anchors = 29-57 ft. lbs.Seat belt retractors = 29-57 ft. lbs.STARTER28-38 ft. lbs.ABS WHEEL SPEED SENSORS14-18 ft. lbs.POWER STEERINGReservoir bolts…
KLDE & FSDE Technical Data
Technical DataIgnition Area:Spark-plug gap: 1.0-1.1mm on 2.0 & 2.5Spark plugs – 2.5: NGK ZFR5F-11 (standard), NGK ZFR6F-11 (for UK & USA)Spark plugs – 2.0: NGK BKR5E-11 (standard), NGK BKR6E-11 (for UK…
KL Engine PCM Grounds
Bad grounds can result in no start issues and faulty sensor readings. These grounds are located on top of the transmission, most of them secure via 1 bolt and connector in…
End of content
End of content