KLDE & FSDE Technical Data
Technical DataIgnition Area:Spark-plug gap: 1.0-1.1mm on 2.0 & 2.5Spark plugs – 2.5: NGK ZFR5F-11 (standard), NGK ZFR6F-11 (for UK & USA)Spark plugs – 2.0: NGK BKR5E-11 (standard), NGK BKR6E-11 (for UK…
1993-1995 OBD1 Mx6,626,Probe CEL Codes
Obd-1 Codes for the 93-95 Ford Probe, Mx6 & 626 The OBD-1 computer system was used in the 93-95 Ford Probe, Mx6 & 626To check for OBD-1 codes, use a paperclip and…
1996-1997 OBD2 KLDE V6 CEL Codes
Obd-2 codes for the 96-97 Ford Probe, Mx6 & 626These codes must be read from the car with a scanner.P0100,P0102,P0103- Mass Airflow(MAF) sensor or circuit faultP0110,P0112,P0113- Inlet Air Temperature(IAT) sensor or…
KL Engine PCM Grounds
Bad grounds can result in no start issues and faulty sensor readings. These grounds are located on top of the transmission, most of them secure via 1 bolt and connector in the…
1997 4cyl Mazda Mx6,626, Probe
Select an image below to view or download.All pictures are in 8.5″ x 11″ Printer page format for easy printing.
1996 4cyl Mazda Mx6,626, Probe
Select an image below to view or download.All pictures are in 8.5″ x 11″ Printer page format for easy printing.
00. Turbocharging the KL V6 Engine
How reliable is it?A common misconception about turbo charging the KL V6 engine is that its unreliable. This is mostly brought up by hearsay. Done correctly, it can actually be more…
01. MSPNP
This is guide is for reference only. These step by step instructions are only an overview the process to adding a turbo to your car.All information used from this guide is…
02. IAT Sensor
Intake Air Tempature SensorThis will allow you to remove the stock VAF from the intake system. Intake Air Temp Sensor (IAT)All that you will need For the MSPNP is a GM Open Elemant…
03. Wideband 02 Sensor
Wideband AFR MonitoringYou will need a Wideband 02 sensor to monitor what your engine is running for fuel load, especially under boost. This will tie directly into the MSPNP2 for accurate…
End of content
End of content