Oil Temp – Suitable location for Oil Temp gauge and/or Oil Pressure Gauge

Located to the right of the clutch slave cylinder is a hex plug into the engine block. If you would like to use this location for a oil temp gauge you will need a 3/8″ NPT reducer fitting to your included sensor. If you would like to use this location for both a oil temp and pressure gauge, You will need a 3/8 NPT “T’ Fitting with reducer fittings.

Oil Drain – Suitable location for Oil drain line from the turbo.

Use a 5/8 to 1/2NPT pipe bung, The larger the hose and fitting the lower the oil pressure in the turbo.

Oil PSI – Suitable Location for Oil Feed for the Turbo, and/or Oil Pressure Gauge.

Located above the Oil Filter is the location of the OEM Oil Pressure sensor, Typically this is sensor is already unplugged or removed. You can use this location for a Oil Feed and/or Oil pressure. To use both You will need a 1/8 NPT “T’ Fitting.