Autometer Ultra-Lite Gauge Design Download

This download is for Tuner Studio dash design that resembles Autometer Ultra-Lite gauges.

To use the dash file:

1. Download and unzip the file to your pc.
2. Open Tuner Studio, open your project, right click on your dash and select load/save then load dash.
3. Check other box, then select … box, and go to where you saved the unzipped .dash file.
4. You may get a Warning message indicating wrong firmware signature. Click  YES continue loading.
5. After the dash is loaded, you may need to change input channels to match your project.  Example: These dash’s are created with MS3 signature, you may be using MS1 signature and not have the same input/outputs as MS3.
6. To add/change gauges, select any of the gauges and right click, select copy.  Now right click on the background, right click, select paste. Now right click on the pasted gauge and select any input you would like to change it to. Example: copy pasted: tachometer and to change it to temp, find temp sensor inputs 1 and select coolant temp. The gauge will automatically change.