Nissan Red Side Feed Injectors (270CC )
$206 Injectors Exactly as shown without Orings, used for testing fuel rails, all functioned.
Showing 13–23 of 23 results
-
-
-
-
-
-
-
-
12 Pin Pigtail Connector w/6″ Leads
$10Pigtail Pulled from 93 Mx6 V6 with Manual Transmission
Pigtail Connector Type: KLDE Main Engine Harness Interconnect
-
-
Coil Pack Wire Harness for MSPNP2 & QuadSpark
Price range: $100 through $160Coil Pack Wiring Harness for a Plug & Play Megasquirt 2 (MSPNP2) and Quad Spark
Our harness features color coded wiring with labels that eliminates the headache, confusion and risk for problematic wiring for the inexperienced with electrical.
These harness’s will route from your MSPNP2 located in the cabin, through the firewall, to your QuadSpark then from your QuadSpark to your chosen coil pack style.The wire harness’s are entirely made from color coded 20GA automotive wire, wrapped in expandable sleaving, with heat shrink crimped terminals and Deutsch weather pack connectors.
Included in this product is cable ties and step by step by instructions.
Required for this wiring harness: (not included)
MSPNP2 V1.2 / V1.3 Example: MSPNP Gen2 MK9395 from Diyautotune.com
6 Cylinder Coil Pack Example: IGN-6 from Diyautotune.com
Ignition Module* Example: Quadspark from Diyautotune.com
Tachometer Adapter Option
- Yes- Your wire harness will come prewired with a tachometer adapter to allow you to use the stock dash tachometer.
- No- Your will need to utilize a EFI Analytics TunerStudio or MSPNP based tachometer signal from either one of its option ports on the DB connector. Commonly uses are: RaspberryPI or Tablets utilizing HUD, Digital cluster retrofits, custom installs And/Or External 5″ Tachometers such as 5″ Autometer Monster Tachometer
Coil Pack Type Option:
- IGN-6 – This wiring will be complete with a IGN-6 connector and with pre-crimped connectors to personally wire any Coil Driver of your choice. Part#: IGN-6
- 626 -This wiring will be complete with a Mazda 626 (also Ford Taurus & Explorer ) connector and with Pre-Crimped connectors to personally wire any Coil Driver of your choice. Common Part #s: C925, FD480T, DGE446
- FREESTAR– This wiring will be complete with a Ford FreeStar/F150 connector and with Pre-Crimped connectors to personally wire any Coil Driver of your choice. Common Part #s: C1312, DG485, FD498
- OTHER -This wiring will be the basics with pre-crimped connectors to personally wire any Coil Pack or Coil Driver of your choice.
-
Mazda Mx6 Driver Door Card Handle
$20It is common for the drivers door handle on the 2nd gen Mx6 to crack in the portion that secures it to the door, its also common for the edges to be broken away.
We designed this door card handle to replace the OEM handle without modification.
Simply remove the broken OEM handle and pop in this handle and secure it with your existing screw.
Features:
- Fits like OEM
- Built in Ridges to seat into the door card
- Thick base to resist cracking that the OEM handle is prone to.
- Printed in ABS-Glass Fiber for strength and durability.
Alternatively if you would like to 3D Print this door handle on your own, you can download it from our Free Downloads page.
End of content
End of content