I started this project with the idea in mind that I wanted it to be on a rolling cart, that could be self contained and the ability to be locked to prevent unwanted operation.

I started with lenght of 4"x4"x 3/8" Square Tubing as the support structure for the hydraulic ram.

Here is a test bend with the Support structure tacked to the rollling cart.

Now that I had the concept more refined and tested, I felt sure to start making its walls and table top.

I temporary mounted the Eastwood Tubing notcher to the top for quick notching.

On the backside I made a location to store my old hydraulic pipe bender.

Now coming along with the 16GA sheet metal walls.

I located the hydraulic pump out far enought that it could be easily filled.

Making some test bends and using the extension arm to provide tubing stability.

Making some test bends and using the extension arm to provide tubing stability.

Making some test bends and using the extension arm to provide tubing stability.

Ability to level tubing to the machine.