J-Spec Headlight Mounting Brackets
$25.00 – $42.00
Description
Newly updated for 2024!
Our custom J-Spec headlight mount brackets are designed for clean and simplified look.
They are 100% bolt on utilizing existing bolt locations on your Mx6.
***Cutting and notching the chassis is still required to mount your J-spec Headlights to an A-Spec Chassis but these brackets will aid in mounting/securing. ***
The brackets are CNC cut from an aluminum sheet, they are light weight and rust resistant.
Our new updated design option offers rivet nuts installed for easier installation and removal when needed.
Also updated are the spacers from billet aluminum to 3d Printed in ASA, this keeps the cost down while also making the spacers easier to sand down if needed.
Lost or damaged a spacer? These spacers can be downloaded and 3d printed as needed.
Bracket Options
Bare Metal
The brackets will arrive in a bead blasted aluminum finish. They are pre-ready for primer and paint.
Gloss Black
The brackets will arrive coated in POR15 Topcoat Gloss Black.
Bracket Options
Standard
Standard Brackets will come with pre-drilled mounting holes and hardware with nylon locking nuts. The standard option requires you to hold the nut size of the hardware while tightening the bolt side of the hardware. This method can be a bit frustrating if you have to remove your headlights at later time.
Rivet-Nut
These brackets will come with rivet nuts mounted to the brackets. The hardware can be installed/removed without holding the opposing side of the hardware with another tool. This makes installing/removing the headlights easier.
Included in this Item
Materials Used
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 6 × 4 × 1 in |
Type | Standard, Rivet-Nut |
Finish | Black, Bare Metal |
ASA Filament Information
Pros
- Strong UV resistance
- Strong chemical resistance
- Water resistance
- Post-processing capabilities with acetone
- High Impact resistance
- Tough
- Durable
- Good finish
- Anti-static
Cons
- Release dangerous fumes
- Expensive compared to other 3D printing filaments in the market
- Higher extruder temperatures
- High printing energy consumption
- Parts may crack
- Parts may warp and sink
Spacers Download
3D STL/3MF File Download | JspecSpacersZip |
Print Orientation | Upright |
Recommended Material | ASA, ABS or PETG |
Recommended Resolution | .10 -.16 |
Recommended Infill | 15% |
Recommended Support | None |
Recommended Adhesion | None |