All Products

Showing 1–15 of 38 results

Adjustable Timing Belt Tensioner
0 out of 5
$85 – $105
Don’t get stranded from a common failure, use our tensioner for reliability!

Select options This product has multiple variants. The options may be chosen on the product page
MSPNP2 Harness w/Coil Pack Wiring
0 out of 5
$110 – $140
Coil Pack Wiring Harness for Plug & Play Megasquirt 2 (MSPNP2) King6fab’s color coded wiring harness’s, eliminates the headache, confusion and risk for problematic wiring. These harness’s will stretch from the PNPMS2 located in the cabin, through the firewall, to the coil drivers, from the coil drivers to the coil pack and from the coil…

Select options This product has multiple variants. The options may be chosen on the product page
Product on sale

Hood Prop Rod Bushing’s
0 out of 5
Original price was: $15.Current price is: $12.
Small Details Matter! This bushing set is designed as a direct replacement of the stock rubber prop rod bushing. Features: The material used for these bushings is heat & abrasion resistant virgin Delrin® Acetal Plastic Included in this set: 2 Bushing Halfs as pictured. Missing a hood prop holder? Check out our free 3d Print file…

Add to cart
HEI Wiring Harness
0 out of 5
$60
Select your Vehicle Year and Option

Select options This product has multiple variants. The options may be chosen on the product page
Expansion Tank V3
0 out of 5
$235 – $250
If your one of the unfortunates to have a broken OEM expansion tank and cannot find options or are finding used options that are being price gouged, King6fab has a solution for you. What’s new with the V3 Design? 2.0 OD x .120wa 5052 Aluminum Tubing. 3/4 Aluminum side hose barb end. 5/8 Brass 90deg…

Select options This product has multiple variants. The options may be chosen on the product page
Nissan Injectors Wire Harness
0 out of 5
$105.80 – $130.50
[vc_row][vc_column][vc_column_text]Nissan side feed injectors wiring harness completely sleeved, heat shrunk, with weather pack connection and wired for megasquirt systems. [/vc_column_text][special_heading title=”Options” subtitle=”Injection Wiring Options”][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Batch Injection Batch Injection is the most commonly used, each injector bank is run in a batch. Batch Injection is used on MS1,MS2 and MSPNP2.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”4930″][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Sequential Injection Sequential…

Select options This product has multiple variants. The options may be chosen on the product page
DIY Front Turbo Cross Member
0 out of 5
$70

This kit is the raw materials to build your own front cross member using tubing type of your choice.

Add to cart
Radiator Support Brackets
0 out of 5
$45 – $70
These brackets are made from aluminum, strong and light weight. Designed to replace the stock radiator support brackets directly without modification. They add a custom look, will not rust, bend or fall apart like the stock supports. Installation takes less then 5min and requires a 14mm wrench. Features: Replaceable rubber grommets Aluminum material, will not…

Select options This product has multiple variants. The options may be chosen on the product page
DIY Rear Cross Member
0 out of 5
$85 – $170

Select options This product has multiple variants. The options may be chosen on the product page
Product on sale
Wiper Cowl Covers
0 out of 5
Original price was: $20.Current price is: $15.
Included in this kit:
- (3) Large oval covers
- (6) Small oval covers
Select options This product has multiple variants. The options may be chosen on the product page
Product on sale

Miller255 Welder Cart – Zip Package Download
0 out of 5
Original price was: $40.Current price is: $20.
This is a downable Package only.

The package is a 23.4mb zip file.

The package only includes information and files to build the shown cart.

Add to cart
Fuse Box Cover Face Plate
0 out of 5
$20 – $40
If your looking for an extra custom look under the hood, a fuse box cover plate is a first step. An easy modification, that gets attention. These plates come blank and can be mounted with double sided adhesive. 11GA 6061 Aluminum Sheet Sanded Brushed Polished 1 Fuse Box Cover Plate equipped with…

Select options This product has multiple variants. The options may be chosen on the product page
DIY Tubular Rear Cross Member W/Lower Mount
0 out of 5
$75

This kit is the raw materials to build your own front cross member using tubing type of your choice.

Add to cart
Product on sale

Driver Door Card Handle
0 out of 5
$6 – $20

King6fab Printing Service

Don’t have a printer and need this model? Let us print it for you.

Or Choose to Print it yourself by Purchasing the file.

Select options This product has multiple variants. The options may be chosen on the product page
DIY Pro Aftermarket Seat Bracket Kits
0 out of 5
$70 – $180
This product is a DIY Item, you will be receiving CNC cut materials that are flat and unbent. They will require bending and welding on your part. You WILL NEED A WELDER to assemble these brackets. Bending technique can be achieved with a vise and a hammer.

Select options This product has multiple variants. The options may be chosen on the product page